|
| Author | Message |
|---|
peanut

Number of posts: 65 Age: 38 Location: conway, sc Registration date: 2009-05-02
 | Subject: Bearings in front dif Fri Nov 06, 2009 8:11 pm | |
| Has anyone had to replace the bearings in the front dif? I had up and down play where the inner axle goes into the dif, so I took it apart. I dont know if thats where the play is but im going to put new seals and bearings in it. Has anyone had this play in the inner axle? Any feedback would be greatly appriciated. This is for an '09 RZR by the way. I only have 700 miles on it. The bearing in there are China made, very disapointing, I thought Polaris was American made. |
|
 | |
bush Moderator

Number of posts: 1089 Age: 25 Location: Castlewood VA Registration date: 2009-02-11
 | Subject: Re: Bearings in front dif Fri Nov 06, 2009 8:23 pm | |
| the play is normal. some have more than others. but my 09 was very losse but my brothers was not as bad as mine. _________________ Jarred
2010 orange madness rzrs
09 sunset orange LE RZR crashed
04 Rhino 660
01 Chevy 3500 496 bigblock
|
|
 | |
peanut

Number of posts: 65 Age: 38 Location: conway, sc Registration date: 2009-05-02
 | Subject: Re: Bearings in front dif Fri Nov 06, 2009 8:31 pm | |
| Will it woller out anything if it has play like that? |
|
 | |
bush Moderator

Number of posts: 1089 Age: 25 Location: Castlewood VA Registration date: 2009-02-11
 | Subject: Re: Bearings in front dif Fri Nov 06, 2009 8:39 pm | |
| i guess it could?  but the play is not in the bearings its between the end of the axle and the splines that the axle goes into if that makes any sence. _________________ Jarred
2010 orange madness rzrs
09 sunset orange LE RZR crashed
04 Rhino 660
01 Chevy 3500 496 bigblock
|
|
 | |
peanut

Number of posts: 65 Age: 38 Location: conway, sc Registration date: 2009-05-02
 | Subject: Re: Bearings in front dif Fri Nov 06, 2009 8:45 pm | |
| Thats what I was thinging, but I guess I will go ahead and replace the bearings while I have it apart. I'm also thinking about replacing the roller cage with an aluminum one. The bearings felt a little rough anyway. |
|
 | |
bush Moderator

Number of posts: 1089 Age: 25 Location: Castlewood VA Registration date: 2009-02-11
 | Subject: Re: Bearings in front dif Fri Nov 06, 2009 8:55 pm | |
| will not hurt to change and keep the others as spares. if you have it apart you should change the cage also. i got the one from superatv and put it in my LE worked great for the few weeks i ran it. i still have it to put in the S sometime. _________________ Jarred
2010 orange madness rzrs
09 sunset orange LE RZR crashed
04 Rhino 660
01 Chevy 3500 496 bigblock
|
|
 | |
peanut

Number of posts: 65 Age: 38 Location: conway, sc Registration date: 2009-05-02
 | Subject: Re: Bearings in front dif Fri Nov 06, 2009 8:58 pm | |
| Thanks for the info, that helps! |
|
 | |
sprinklerhead

Number of posts: 103 Age: 42 Location: Mount Hope,Maple Fork Rd,WV. Registration date: 2009-02-14
 | Subject: Re: Bearings in front dif Fri Nov 27, 2009 12:10 pm | |
| Yes the play in the axles are normal,however more than a 1/2" movement MIGHT be something to look into. Just a little note on those plastic cages....they are made of plastic for a reason.They are made to give away before anything else in the front end on purpose.I tried one of the aftermarket steel cages and when i had a problem, it destroyed my entire front diff. cause that steel cage didnt break and by the time i got stopped,my whole case was busted up.When my original stock plastic cage broke,all i had to replace was the cage and armature plate.just my 2 cents,but i went back to plastic. |
|
 | |
ohiofishman

Number of posts: 97 Age: 42 Location: ohio Registration date: 2009-03-31
 | Subject: Re: Bearings in front dif Fri Nov 27, 2009 9:35 pm | |
| almost all bearings are china or mexico  made..I used to work for napa and I remember when Tempkin bearings were made in Akron ohio and C R bearings were made in Mississippi...the good ole days |
|
 | |
punder

Number of posts: 225 Age: 41 Location: Winston Salem NC Registration date: 2009-02-22
 | Subject: Re: Bearings in front dif Yesterday at 6:17 am | |
| About time to Boycott anything not made in America by Americans , time to bring the money train back home . _________________ Bigger is Better [u]
|
|
 | |
|