Riding the next 2 days

Well I will be leaving early in the morning for 2 days of guiding the Special Forces so maybe I will get some pix & videos for you all

Bobby D,
Where you guding the SF or is this a Black Ops operation?

good luck

zingo wrote:

Bobby D,
Where you guding the SF or is this a Black Ops operation?

good luck

Just around da woods

Good Luck bobby and have fun! Dont let Travis aggravate you too much!

have a safe trip

TBONE21 wrote:

Good Luck bobby and have fun! Dont let Travis aggravate you too much!

They don't use Travis anymore for some reason

Have a good 2 days & take video as I know you will

Well I got back a little early as we had some mechanical problems including my RZR.On Wednesday I noticed some grinding in the front end and my steering was getting hard to steer.My drivers side front wheel gave up a bearing and the wheel was flopping back and forth so we limped it back to Ashland and I rode shotgun in the lead Teryx the rest of the day.Today I did the same thing I rode shotgun and we had problems with overheating and a chain coming off of one of the 6 wheel atvs.We also had problems with overheating & a chain on the first day too.I some pix & video but not as much as I would have had if I would have rode my RZR the whole time.I have been up since 6:00am and have to go into work at 6:00pm until 6:00am tomorrow anyways I will get a video done tomorrow after I get up and it will have the pix and videos as one video

sorry to hear your troubles Bobby! Im glad it happened before the fall ride so that it will be fixed!

THATS NOT COOL, BUT GLAD IT HAPPEN NOW & NOT LATER LIKE T BONE SAID

shawn wrote:

THATS NOT COOL, BUT GLAD IT HAPPEN NOW & NOT LATER LIKE T BONE SAID

that's what I was thinking

some of the bearings that we replace are called a sealed bearings, but if you want them to last twice as long, pop out the seal on the outside edge and you will be suprized to see

for some reason it just took me out of the forum.. so ill finish. to see how little grease is in the bearing, just enough to keep it from rusting on the shelf. so i pop the seal out and pack the bearing with wheel bearing grease. i found this out the hard way, put in a new bearing and it only lasted about a month, so i pack all my bearings when they need to be replaced.

thanks for the info pushrod, I'm getting ready to check my bearings this weekend

how is the proper way to check them?

use a SMALL screw driver, pop out the OUTSIDE edge of the seal. take your time and you wont damage the seal. pack the bearing and pop the seal back in. WORKS GREAT, done this for years.

Pushrod

yea do that i got 2 weeks out of new bearings and im pissed !!!!!!!!!!!
my wheels flop worst than before !

Well I thought it was a bearing but it was not.The cotter pin on the nut on the hub was gone and the nut was loose