Easiest way to wash and work on the Rzr Pics

" border="0" alt=""/> " border="0" alt=""/> " border="0" alt=""/>

:Cool:


did you break a CV joint?

Hey Bush, both large inner clamps came loose last trip. You have to buy the complete kit with boots to get the clamps so i just changed it all. One boot did have a small hole after closer inspection.

that sucks. you can get boot clamps at the auto parts store but you have to have a tool to get them tight. i have also used large zip ties on them before and they work great. use a pair of pillars to pull them tight.

That is handy havin a forklift around i bet that helps out alot. :Cool:

:Cool: Way to wash the RZR.

Yea the WV mud isn't as bad as the red clay from down south but the forklift still makes it a more thorough wash job. I'd hate to see how much Georgia clay would still be in the rockers otherwise. There' so little clearance between the clamp and the a arm mount that some clamps won't clear. Didn't try zip ties, i will next time for a bandaid.

COOL PIC'S--NICE WASH JOB---MAKES IT MUCH EASIER I'M SURE

Can I bring my Rhino down for you to wash! LOL Nice set up

:Kewl Pics:

neuromax wrote:

Can I bring my Rhino down for you to wash! LOL Nice set up

Sure, as long as i can get it muddy 1st!

:Kewl Pics: Wish I had me a lift! I can usually get up under mine when it's on the trailer. I just leave it on there to wash underneath. But then it makes for a mess on the trailer too.