Fitting a Rhino into an enclosed trailer

I was wondering if anyone with a Rhino had an enclosed trailer that they haul it around in? I am in the market for an enclosed trailer for a Rhino that I might buy, and the biggest concern is over the height/width of the opening at the rear of the trailer (will be buying a ramp door). I am thinking a 7X16 or 8X16, but most trailers of that size have a rear opening with a height of 72". I am pretty sure that means I will need an extra height trailer, but I was also wondering about the width. Anyway, just wanted to see if anyone here had an enclosed trailer they use with their Rhino, and if so, the dimensions and measurements of the rear door opening.
Thanks!
Steve

PM Hot Rod Rhino (James) he has a enclosed trailer he hauls his Rhino in!

Thanks bud...I would PM him, but the forum is telling me I have not reached the post limit to be able to PM anyone yet.

go ahead and make some posts until you hit 21 posts. Then you will be good to go.

Be sure to buy one as wide as you can because of doors. If you add them and you buy a 7 foot wide then you may not be able to get out.

TBONE21 wrote:

Be sure to buy one as wide as you can because of doors. If you add them and you buy a 7 foot wide then you may not be able to get out.

Good point Tbone, thanks! Looks like 8 feet wide at least then.

Steve, it looks like you now have enough posts. You can give James a call also his number is 304-673-2602

Your new Rhino is sitting in his shop right now too so he should be able to tell you EXACTLY how tall it is ;)

Thanks Daryl...I sent James a PM since I am now able to do so.

find me a afordable slide in truck camper and I might sell you a 28 ft rhino trailer

Picked up new 20 foot trailer today. Has a foot of additional height, and dove tailed as well. Problem solved. :)
Thanks all!