Anyone running BigHorns 26x12x12 on the rear of RZR?

I have a set of RZR S tires and wheels and went to install the rears and there is not way I can run 26x12x12 on the rear. I have 1.5 spacers and I bet I need another good inch to clear the motor mount. I thought about grinding the motor mount but I still dont think it would work.

Anyone running them on regular RZR?

So.....I might have two Bighorns 26x12x12 with 400 miles on them for sale real soon. Will probably buy 26x11x12 for the rear.

I have always went with 11" width on the rear and 9" on the front

Steve K wrote:

I have a set of RZR S tires and wheels and went to install the rears and there is not way I can run 26x12x12 on the rear. I have 1.5 spacers and I bet I need another good inch to clear the motor mount. I thought about grinding the motor mount but I still dont think it would work.

Anyone running them on regular RZR?

So.....I might have two Bighorns 26x12x12 with 400 miles on them for sale real soon. Will probably buy 26x11x12 for the rear.

get some off set rims and then add spacers...you will be fine,.

steve, are they mounted on a rim? if so have you tried them?

bush wrote:

steve, are they mounted on a rim? if so have you tried them?

Bush, they are the exact same tires and wheels like you have on the S. I did put the rear tires on when I noticed there was no clearance. What is the offset on these black crusher rims?

I am wondering if the 26x11x12 will clear the motor mounts??

Steve I have 26 -12-12- GBC Dirt Tamers on my rzr which is excatly like the big horns , i have 1 inch spacers with a motorsports alloy rim and i have no probs what so ever with clearence , i wanted an 11 on the rear but they do not make the GBC in 11" ,had to get 12's

I believe the off set you need is +5 - 2. I went outside and looked on my empty boxes, but they are to faded to read. I am bringing 2 2in spacers to the spring ride if you want them. I will be there thursday.