tires

just got my tires in today. atvoutfitters

still waiting on my high lifter springs and the thunder hawk lift. the springs should be here by friday i hope and the lift will be another week (back ordered for powder coating).

so will i have rubbing if i put the tires on with out a lift? i have 1.5 inch spacers on all 4.

tires are 27x9x12 and 27x12x12

Can't wait to see them mounted up

They look a lot like Bighorns or Duro Grips or is it just me? Good lookin Tars Bush.

Those are some nice tires are you going to use the stock rims. :138:

Mudytoyota wrote:

Those are some nice tires are you going to use the stock rims. :138:

yes
i will be using the stock wheels.

:168:

Can't wait to see everything installed

bush, you will be fine without the lift, they might rub a little on front at full turn, but you can use a heat gun and a piece of 2x4 to fix that, just heat where it rubs up real good then turn the wheel put the wood between the tire and rub spot to hold it in till it cools and it is fixed. It should be ok on the rear, but check the space between the motor mount and tire. Then check it again after you add the lift, the more you lift it up the closer it pulls that right rear in toward the mount. It should be alright, but you may have to go to a 2'' rear spacer with the stock wheel due to the 6-2 offset they have.

gunny

Mmmm! I like them TARS! :138:

Nice looking tires! I would run the stock rims too! They are NICE!

i got to tires mounted and on the rzr!! looks great.

BUT the front drivers side rubs bad on the skids and the floor/firewall. hope the high lifter springs helps. i hope the come in tomorrow, if not no ridding for me untill i get them and i still may need to add lift on the front!

pics uploading!!

Looks REALLY Good bush, sorry to har about the rub. Hope your lift does away with it.

ITS TIME FOR WHEEL SPACERS & LIFT KIT

Bush have you tried cranking your shocks all the way up :158:

WV Rider wrote:

ITS TIME FOR WHEEL SPACERS & LIFT KIT

it has 1.5 spacers on all 4 and have the high lifter springs ordered. i hope that will fix the rubbing.



bobby the shocks are allthe way up.

Which skid plate you using?

RHarrah wrote:

Which skid plate you using?

strong made

You should probably give up since it's rubbing and sell it now. Just so happens, I came into a little chunk of change from tax return.......I have a figure in mind.....thinking somewhere around 2500......you would deliver for this price of course......

No shit man. Your RZR looks awesome!

Airborne LT wrote:

You should probably give up since it's rubbing and sell it now. Just so happens, I came into a little chunk of change from tax return.......I have a figure in mind.....thinking somewhere around 2500......you would deliver for this price of course......

No shit man. Your RZR looks awesome!

LT i can do that but it will be $2500 a month for the next 6 months. lol
that might cover what i have it it.

Tires look real good thinking about getting the same let me know how well they do?

bush wrote:

RHarrah wrote:

Which skid plate you using?

strong made

Is there a web site for them?

Awesome Tires man, I have the same ones, but I have 2 inch wheel spacers and no lift. My tires are 26 in though and they only run at full turn left or right in the front. But I love the tires, they do awesome. They ranked really well in the UTV magazine I have also.

RHarrah wrote:

bush wrote:

RHarrah wrote:

Which skid plate you using?

strong made

Is there a web site for them?

http://www.candssales.com/store/page24.html

i got them from here. but they have raised the prices. i paid 448 for them and free shipping.

atvoutfitters.com also has them.

http://www.atvserver.com/mm5/merchant.mvc?Screen=PROD&Store_Code=ATV&Product_Code=SP122AL&Category_Code=UTLP

Bush, you will get nothing with the highlifter springs except a stiffer spring, they will not raise the ride height at all. I measured mine and did not gain anything. The only people that have gained height with them were 08 owners that waited till their stock springs were worn out. You will have to take off those fender skids or beat them back or it will continue to rub. Good to see you have no issue with the mount.

RHarrah wrote:

bush wrote:

RHarrah wrote:

Which skid plate you using?

strong made

Is there a web site for them?

Here is a link to the skid plate and a-arm guards that I have. And I didn't know it til I looked but the pictures they are using on their site are of my RZR. lol..

http://www.extrememetalproducts.com/Polaris/c29/p145/RZR-Full-Belly-Skid-Plate-Set/product_info.html?osCsid=5d945e4981447c51dcd2cd9e059239ca

anyway on sale right now for $378.

Excellent Skid plate too.