RZR lift

What lift does everyone have on the RZR? Give me the good/bad of what you have seen and heard.

I`v got the super atv 3in top mount lift no CV bind with it.

2" Pro Lift on mine for over 2,500 miles and no problems I rode 2,000 miles without a lift

Stealth wrote:

I`v got the super atv 3in top mount lift no CV bind with it.

LT CLAY can hook you up with it.

I just went from a 2" bottom mount to a 3" top mount. So far, so good. I had a small amount of axle noise with the 2" on the rear, but I think that is common from what I hear on some RZR's.

I run the Roktek, 3'' on mine. full front and rear kit w/ quick front sway bar disconnects, 189.00 on ebay. Beware of bottom mount lifts, they can bind the rear axles.

Anyone think a lift is necessary with an S?

Airborne LT wrote:

Anyone think a lift is necessary with an S?

Correct me if I'm wrong but does the S not come pre-lifted from the manufacturer?

RHarrah wrote:

Airborne LT wrote:

Anyone think a lift is necessary with an S?

Correct me if I'm wrong but does the S not come pre-lifted from the manufacturer?

They already have more ground clearance because of the 26" Bighorns and having different shocks I think but don't know about any pre-lift from the factory.I'm sure some RZR S owners will chime in :yea that:

Yeah, I'd kinda like to lift mine a little, beacuse I bottom out on everything with it. I just don't know if it will take away from the handling.

Im going to go with the 3" Roktec on mine im tired of bottoming out.

Hell, I still bottom out with the Rhino even with a lift.

On a S model you can dial up the preloads on the fox shocks and get the same clearance as a lift kit, but the S will cost ya 3k more to buy.

2" Rubberdown no problems so far

I installed my EMP 2" lift kit last night in about 1 hour. It was easy and really makes a difference.. The sag that use to be in the front is gone. Nice lift!!!!! I also would recommend the 1.5" wheel spacers that EMP sells..

:Lookin' good:

2" rubberdown lift with highlifter springs on mine. (I am debating on a 6" lift)

USMCSKI wrote:

2" rubberdown lift with highlifter springs on mine. (I am debating on a 6" lift)

just wondering how the highlifter springs were working i was thinking of them for myself or shocks just tired of the sag and bottoming thanks

The springs are working out great...I bought them because the original springs were starting to sag after only 100 miles which caused the bump stops on the front shocks to blow out. The ride is firmer but my shocks no longer bottom out. I am happy with this setup but I have been debating on the 6"+ lift after seeing some monster rzrs around.