replacing rear outer A-Arm Bushings

Subject: replacing rear outer A-Arm Bushings February 20th 2012, 10:17 am

Need to change the outer rear A-Arm bushings in the rzr

What kind and where to buy ?????????

any help appreciated.

thanks, Craig

Subject: Re: replacing rear outer A-Arm Bushings February 20th 2012, 10:49 am

The last ones that I bought was from Cheap Cycle Parts, but try World Class in High point...they are great to work with and will treat you right.

Subject: Re: replacing rear outer A-Arm Bushings February 20th 2012, 10:51 am

Same thing is getting done to my "S" as we speak. I just had the stock ones put back in it, they lasted me 3 years.

Guest

be sure to tell World Class your from the site. They will give u a discount like Ray Ray said.

Subject: Re: replacing rear outer A-Arm Bushings February 20th 2012, 12:03 pm

Hickory is a long way to High Point ... I suggest calling Amanda and getting a price , then hit your local dealer up for the same price ...

Subject: Re: replacing rear outer A-Arm Bushings February 20th 2012, 1:00 pm

OEM works just as good as most. Check this site. Suggest you replace the sleeves as well.

http://www.donwoodpolaris.com/custompage.asp?pg=oem&gclid=CLDQtI71rK4CFYPd4AodsWMDRQ

Subject: Re: replacing rear outer A-Arm Bushings February 20th 2012, 9:26 pm

All good places to buy from ---

Subject: Re: replacing rear outer A-Arm Bushings February 20th 2012, 9:33 pm

killlerskunk wrote:: Need to change the outer rear A-Arm bushings in the rzr

What kind and where to buy ?????????

any help appreciated.

thanks, Craig

Call world class powersports....they will ship it to you...plus they give you a discount...

Subject: Re: replacing rear outer A-Arm Bushings February 20th 2012, 9:43 pm

Yep. Bubba. Called amanda she is hooking me up

Subject: Re: replacing rear outer A-Arm Bushings February 20th 2012, 10:00 pm

When I replaced mine I drilled the housing on top and bottom and put grease fittings in you have to pull wheels but 1200 hundred miles and no more slack in them. I replaced with stock bushings.

Subject: Re: replacing rear outer A-Arm Bushings February 21st 2012, 9:34 am

stroberts5 wrote:: When I replaced mine I drilled the housing on top and bottom and put grease fittings in you have to pull wheels but 1200 hundred miles and no more slack in them. I replaced with stock bushings.

Thats a good idea...I'm gonna do that to mine the next time they need changing...

Guest

That's a great idea

Subject: Re: replacing rear outer A-Arm Bushings February 21st 2012, 11:16 am

stroberts5 wrote:: When I replaced mine I drilled the housing on top and bottom and put grease fittings in you have to pull wheels but 1200 hundred miles and no more slack in them. I replaced with stock bushings.

Great idea. 10/10/10

Did you drill the pivot tubes, as well? I'm going to try it. Thanks for the tip.

Subject: Re: replacing rear outer A-Arm Bushings February 21st 2012, 12:33 pm

I drilled the aluminum housing there is a gap in the center between bushings drill and tap 1/4 24 tap size make sure there out slightly towards rotor so fittings miss control arms.

Subject: Re: replacing rear outer A-Arm Bushings February 21st 2012, 12:57 pm

thanks

» rzr s rear outer cv joint
» 2011 RZR Rear Outer CV Axle
» Rear Bushings on a RZR
» Bushings for A-arms
» Replacing the RZR Drive Belt