Any recommendation for good SXS mechanics (Rhino)? Greensboro, NC area

I have a fantastic motorcycle/ATV mechanic that has always worked on my rides, but just learned this morning that he is out on medical leave for another 2 months. Anyone in the Greensboro, NC area (or close by) got recommendations of trustworthy mechanics who could repair a few things on a 2005 Rhino? Mind you, we are not talking about terribly involved stuff here, as I only need the following addressed:
1. Torn CV boot replaced (and of course, if any damage to the axles, that taken care of).
2. Rear axle on the other side "seated" into the differential properly, as I don't think it is sealing properly.
3. Muffler is shaking after the last ride and making a racket. It's still on the hanger, so guessing it might have just come loose from the manifold (granted I could probably address this, but since in the shop for the first 2 items, can just get it done then).

Of course price is a factor, so trying to avoid dealers if at all possible (as any experience I have had with them over the years has been less than stellar).
Any input is most appreciated. Thanks all.

Steve, the only one I really know of that I have heard great things about locally is the guy Matt knows in Statesville. I know thats still an hour away but thats all I know of around here.

The boot shouldn't be a big deal to change. The exhaust rattling was a problem on my Rhino also. I ended up having to Frankenstein (weld, bracket, hanger etc) a fix to get it to stop LOL.

ncgrizz wrote:

I have a fantastic motorcycle/ATV mechanic that has always worked on my rides, but just learned this morning that he is out on medical leave for another 2 months. Anyone in the Greensboro, NC area (or close by) got recommendations of trustworthy mechanics who could repair a few things on a 2005 Rhino? Mind you, we are not talking about terribly involved stuff here, as I only need the following addressed:
1. Torn CV boot replaced (and of course, if any damage to the axles, that taken care of).
2. Rear axle on the other side "seated" into the differential properly, as I don't think it is sealing properly.
3. Muffler is shaking after the last ride and making a racket. It's still on the hanger, so guessing it might have just come loose from the manifold (granted I could probably address this, but since in the shop for the first 2 items, can just get it done then).

Of course price is a factor, so trying to avoid dealers if at all possible (as any experience I have had with them over the years has been less than stellar).
Any input is most appreciated. Thanks all.

I know a guy in statesville that is not a dealer that would work on it...PM me for the details...

If you have any mechanical ability at all you can replace the CV axle boot yourself.
I have replaced boots,seals,and even had to replace a busted axle. I would say that a Rhino is one of the easier SXS's to work on!

Actually the guy is in Mocksville, more specifically Calahaln. It's still going to take you 45 minutes to get there though. It's the guy I send contact info to you earlier.

Carolinarhino wrote:

If you have any mechanical ability at all you can replace the CV axle boot yourself.
I have replaced boots,seals,and even had to replace a busted axle. I would say that a Rhino is one of the easier SXS's to work on!

wise guy ! ! ! i'm lucky i could mount a pooplaris overhead bag and install my JBS roof. you really are related to rayray, arent you???????????????

Jet wrote:

Carolinarhino wrote:

If you have any mechanical ability at all you can replace the CV axle boot yourself.
I have replaced boots,seals,and even had to replace a busted axle. I would say that a Rhino is one of the easier SXS's to work on!

wise guy ! ! ! i'm lucky i could mount a pooplaris overhead bag and install my JBS roof. you really are related to rayray, arent you???????????????

I wasn't tryin to be a smart ass!!! SMART ASS!!!!!!!! I was just trying to help the guy out!!
Hell even you could fix a Rhino,,,,,Well maybe thats stretching it al little!!! Seems like the only thing you can fix is Jack & Coke!!!

Why am I thirsty all of the sudden? It's almost 5'oclock somewhere, and that somewhere is right here!

Second Chance Cycle in Walkertown .. They are a small shop but they do good work ... There used to be a place in King Years ago Steve that came to one of the TTB meetings , this is that couple , they have just moved to Walkertown .. Carolina Polaris also services all brands ... Seems like there is a place in Kernerville near Parks Chevrolet but can not remember the name of it off hand ..

Carolinarhino wrote:

Jet wrote:

Carolinarhino wrote:

If you have any mechanical ability at all you can replace the CV axle boot yourself.
I have replaced boots,seals,and even had to replace a busted axle. I would say that a Rhino is one of the easier SXS's to work on!

wise guy ! ! ! i'm lucky i could mount a pooplaris overhead bag and install my JBS roof. you really are related to rayray, arent you???????????????

I wasn't tryin to be a smart ass!!! SMART ASS!!!!!!!! I was just trying to help the guy out!!
Hell even you could fix a Rhino,,,,,Well maybe thats stretching it al little!!! Seems like the only thing you can fix is Jack & Coke!!!

Poor Jack

punder wrote:

Second Chance Cycle in Walkertown .. They are a small shop but they do good work ... There used to be a place in King Years ago Steve that came to one of the TTB meetings , this is that couple , they have just moved to Walkertown .. Carolina Polaris also services all brands ... Seems like there is a place in Kernerville near Parks Chevrolet but can not remember the name of it off hand ..

Good point on Second Chance Drew, I forgot about them....nice folks there. Randy R "Roamerr" also had a place up 52 somewhere, maybe Mt Airy or King that did some work on his Rhino. Sheave/clutch spring I think.

Steve, Call me. Or shoot me a PM.



Later

Carolinarhino wrote:

Jet wrote:

Carolinarhino wrote:

If you have any mechanical ability at all you can replace the CV axle boot yourself.
I have replaced boots,seals,and even had to replace a busted axle. I would say that a Rhino is one of the easier SXS's to work on!

wise guy ! ! ! i'm lucky i could mount a pooplaris overhead bag and install my JBS roof. you really are related to rayray, arent you???????????????

I wasn't tryin to be a smart ass!!! SMART ASS!!!!!!!! I was just trying to help the guy out!!
Hell even you could fix a Rhino,,,,,Well maybe thats stretching it al little!!! Seems like the only thing you can fix is Jack & Coke!!!

ROOKIE ! ! ! yes rookie ! only rookies and girls would ruin----------YES---------RUIN Jack by adding coke. Ice is approved and a spash of water is iffy at best. ROOKIE !

Jet wrote:

Carolinarhino wrote:

Jet wrote:

Carolinarhino wrote:

If you have any mechanical ability at all you can replace the CV axle boot yourself.
I have replaced boots,seals,and even had to replace a busted axle. I would say that a Rhino is one of the easier SXS's to work on!

wise guy ! ! ! i'm lucky i could mount a pooplaris overhead bag and install my JBS roof. you really are related to rayray, arent you???????????????

I wasn't tryin to be a smart ass!!! SMART ASS!!!!!!!! I was just trying to help the guy out!!
Hell even you could fix a Rhino,,,,,Well maybe thats stretching it al little!!! Seems like the only thing you can fix is Jack & Coke!!!

ROOKIE ! ! ! yes rookie ! only rookies and girls would ruin----------YES---------RUIN Jack by adding coke. Ice is approved and a spash of water is iffy at best. ROOKIE !

Good Lord......were going to have to switch your tail to Schlitz!!

Jet wrote:

Carolinarhino wrote:

If you have any mechanical ability at all you can replace the CV axle boot yourself.
I have replaced boots,seals,and even had to replace a busted axle. I would say that a Rhino is one of the easier SXS's to work on!

wise guy ! ! ! i'm lucky i could mount a pooplaris overhead bag and install my JBS roof. you really are related to rayray, arent you???????????????

Why you gotta bring me into this Jet....I've been a good boy lately...don't go friggin it up...

Jet wrote:

Carolinarhino wrote:

Jet wrote:

Carolinarhino wrote:

If you have any mechanical ability at all you can replace the CV axle boot yourself.
I have replaced boots,seals,and even had to replace a busted axle. I would say that a Rhino is one of the easier SXS's to work on!

wise guy ! ! ! i'm lucky i could mount a pooplaris overhead bag and install my JBS roof. you really are related to rayray, arent you???????????????

I wasn't tryin to be a smart ass!!! SMART ASS!!!!!!!! I was just trying to help the guy out!!
Hell even you could fix a Rhino,,,,,Well maybe thats stretching it al little!!! Seems like the only thing you can fix is Jack & Coke!!!

ROOKIE ! ! ! yes rookie ! only rookies and girls would ruin----------YES---------RUIN Jack by adding coke. Ice is approved and a spash of water is iffy at best. ROOKIE !

There is a 12 step program that you may need to check into Jet!!!

rayray wrote:

Jet wrote:

Carolinarhino wrote:

If you have any mechanical ability at all you can replace the CV axle boot yourself.
I have replaced boots,seals,and even had to replace a busted axle. I would say that a Rhino is one of the easier SXS's to work on!

wise guy ! ! ! i'm lucky i could mount a pooplaris overhead bag and install my JBS roof. you really are related to rayray, arent you???????????????

Why you gotta bring me into this Jet....I've been a good boy lately...don't go friggin it up...

Pinnocho-------your nose is growing.

Carolinarhino wrote:

Jet wrote:

Carolinarhino wrote:

Jet wrote:

Carolinarhino wrote:

If you have any mechanical ability at all you can replace the CV axle boot yourself.
I have replaced boots,seals,and even had to replace a busted axle. I would say that a Rhino is one of the easier SXS's to work on!

wise guy ! ! ! i'm lucky i could mount a pooplaris overhead bag and install my JBS roof. you really are related to rayray, arent you???????????????

I wasn't tryin to be a smart ass!!! SMART ASS!!!!!!!! I was just trying to help the guy out!!
Hell even you could fix a Rhino,,,,,Well maybe thats stretching it al little!!! Seems like the only thing you can fix is Jack & Coke!!!

ROOKIE ! ! ! yes rookie ! only rookies and girls would ruin----------YES---------RUIN Jack by adding coke. Ice is approved and a spash of water is iffy at best. ROOKIE !

There is a 12 step program that you may need to check into Jet!!!

Its a four step program ! Jack, Ice, Glass, Repeat. see only four!

Where do I sign up for this 4 step program?

What happened to the mechanic thread !!!!!!!!!!!!!!!!!!!!!!!

bubba53 wrote:

What happened to the mechanic thread !!!!!!!!!!!!!!!!!!!!!!!

Did you really have to ask that question Bubba....the same thing that happens to every other thread...IT GOT JACKED!!!!!!!!

bubba53 wrote:

What happened to the mechanic thread !!!!!!!!!!!!!!!!!!!!!!!

Don't worry Bubba......Ray Ray will set them straight!

DATZ RITE.....citizens arrest!!!!

Drew what r u talking about? Don't take that rhino to second chance, Hell no, over charges, second hand work. How far is Trinity from Walkertown (between Greensboro n Winston Salem)? Hell I'll fix it for u at a reasonable rate, not free but I definitely won't rape u. Thought more would jump in to help a man out. I know alot of u have the knowledge to fix this. Come on guys. If u can't find someone close just give me a pm. I should be done Thursday helping a buddy rebuild his popo.

The place in kville is Max Speed, he does excellent work, forgot about him, but 2nd chance no, I've worked on a couple that they had (fixed??????) worked on, not pleased.

rayray wrote:

DATZ RITE.....citizens arrest!!!!

Ray Ray! Dats da Truff!

Wall to Wall in Pinnacle NC. Great place and they know Rhino's well. They jetted and fixed a few items on my 2005 Rhino. Easy to get to also -- take exit 129 off Hwy 52 and turn right. Go 1 mile to old 52 and take a left. Follow old 52 for 3 miles and it's on the right. Call and make an appt first -- that allows a quicker repair.

http://www.walltoowall.com/

As for the muffler hanger you will ultimately need to fix that yourself. If you ride rough it will keep coming loose. I added a few extra bolts then added a muffler hanger at the rear. That fixed it for good. Bet it's still that way in South Dakota...

mike hunt,hunts cycle,336-629-1694,trinity n.c. he will fix u up!!! he rides a rhino and knows the rhino inside and out!!!

rayray wrote:

bubba53 wrote:

What happened to the mechanic thread !!!!!!!!!!!!!!!!!!!!!!!

Did you really have to ask that question Bubba....the same thing that happens to every other thread...IT GOT JACKED!!!!!!!!