correct front u-joint?

Looking at buying this for my 2010 800 rzr and wanted to make sure it will fit the front drive/prop shaft

Will it work?

http://www.ebay.com/itm/230812986187?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Don't know, but this will fit. Should be locally available and at a third the cost.

Precision Universal Joint # 812 (1090265-A)

Awesome thanks! You mean like napa or something like that?

I just got one from tractor supply that Hump had posted about for the RZR S for $19.99 got it put in yesterday and it works great no more clanging or noise period.That noise was getting old and sounded bad but now it feels & sounds like a new machine

Don't the S take a different one then the regular 50" rzr?

CCrider wrote:

Don't the S take a different one then the regular 50" rzr?

Yes from what Hump said but I was just making a point you can get them other places for less money

i had performance east put epi greaseable u joints in my rzr4 and they work great!

wvdreamingrzr wrote:

i had performance east put epi greaseable u joints in my rzr4 and they work great!

The one I got from Tractor Supply also has a grease fitting

I'm going to check TSC tomorrow. Thanks guys

CCrider wrote:

I'm going to check TSC tomorrow. Thanks guys

You may can take yours into a Napa store and have them find one that matches it.

Finzup wrote:

Don't know, but this will fit. Should be locally available and at a third the cost.

Precision Universal Joint # 812 (1090265-A)

Geez. Just take the Precision number to your favorite auto parts store. It's that easy.

CCrider wrote:

I'm going to check TSC tomorrow. Thanks guys

I went to TSC for mine in the S because nobody had anything at the parts stores. I have no idea what they have to fit a rzr there. I took my old one with me, and a set of calipers to measure with and matched something up. You can't just go by looks or a tape measure, as we are talking about tight tolerances here. If you can take the part# to your parts store for yours, they will most likely have it, and it won't be much different in price as TSC.

Go to the parts store for the rzr, and Tractor Supply for the rzr S. Seems to be the easiest for each.

Thanks Hump. Sorry Finzup but I was just wanting a good idea on where to start looking. Didn't want to spend the whole day running from store to store trying to find it.

Well got the u-joints put in. It ended up taking the number from TCS that Hump gave for the "S" and a Precision #338 from Orielly's which was $5 cheaper then TCS.

Didn't know you had an "S", but great you got a good deal, locally.

I don't have a "S" thats what's weird, just a 2010 50"..Who knows with Pooplaris.

Hmmm. Mine has is greaseable. Is yours?

Yeah the new one's I got are greaseable. The stock ones were not.

OK. Go figure.

CCrider wrote:

Well got the u-joints put in. It ended up taking the number from TCS that Hump gave for the "S" and a Precision #338 from Orielly's which was $5 cheaper then TCS.

Great thanks for the info