6-8-2013 Ride out of Matoaka

My god that was quick you are the man... :Git-R-Done!!:kids are at the beach put us as a maybe for now.

Can you put a scared list on here too!!

Wildcat1 wrote:

Can you put a scared list on here too!!

Put a owned list and put me on it because I won't make it home from work till 1am friday night if I'm lucky.
Or, maybe a to poor to ride list. I got 2 grand is guess work on my truck. I'm about ready to just hold it wide open and go.

Hump wrote:

Put a owned list and put me on it because I won't make it home from work till 1am friday night if I'm lucky.
Or, maybe a to poor to ride list. I got 2 grand is guess work on my truck. I'm about ready to just hold it wide open and go.

I got the same problem I don't get home until 1:00am every Saturday morning and get in bed a while after that and get up at 6:00am or before and ride it's just not enough sleep.

Sounds like that Toyota quality is slipping

Bobby D wrote:

Hump wrote:

Put a owned list and put me on it because I won't make it home from work till 1am friday night if I'm lucky.
Or, maybe a to poor to ride list. I got 2 grand is guess work on my truck. I'm about ready to just hold it wide open and go.

I got the same problem I don't get home until 1:00am every Saturday morning and get in bed a while after that and get up at 6:00am or before and ride it's just not enough sleep.

Sounds like that Toyota quality is slipping

Yeah, I would get about 3hrs sleep by the time I got loaded up and made the drive to Matoka.
The truck has been a great one until now. I have seen the lean codes on other makes as well, but more so on these trucks. I got lean bank one and lean bank 2 stored with no power at all while towing, surging while towing or pulling a hill, lots of spark knock, and now the occasional failure to start. Dealer couldn't figure it out. I got a new fuel pump, new o2 sensors, fuel lines and injectors cleaned, converters are clean, and compression checks out ok. I don't know what to do other than run the piss out of it till it dies. I'm not even going to get started on the frame rust.
I do have a hitch on the Jeep now, and it don't do to bad. Tows better than expected.

What truck is this? I have a Toyota truck. Is there something going on with the engine and the frame?

Hump wrote:

I got 2 grand is guess work on my truck. I'm about ready to just hold it wide open and go.
The truck has been a great one until now. I have seen the lean codes on other makes as well, but more so on these trucks. I got lean bank one and lean bank 2 stored with no power at all while towing, surging while towing or pulling a hill, lots of spark knock, and now the occasional failure to start. Dealer couldn't figure it out. I got a new fuel pump, new o2 sensors, fuel lines and injectors cleaned, converters are clean, and compression checks out ok. I don't know what to do other than run the piss out of it till it dies. I'm not even going to get started on the frame rust.

Dang hump. I hate to hear all that about your truck. I saw on Facebook but didn't know it was that bad. I have always thought Toyota built the best vehicles.

Keep us posted.

05 Tacoma. Only frames bad are on the ones that are where it snows alot.

We're gonna try to make it too!

I will join sat and may have a couple rzrs come too not sure yet..

Two more rzrs will be joining us on this one ... is it friday yet?

Maybe depending on dust . If it rains I will try to make it.

pit dog wrote:

Maybe depending on dust . If it rains I will try to make it.

Dang Bobby, I just got home from saturdays ride. Met up with some folks and rode Pennicle creek and Hatfield sunday. My machine started back fireing and threw a code PO336 (crankshaft sensor). Barely made it back to the blue building. Can't ride it. Will try some dielectric grease on the connections. If that dosn't work then it's in for warranty work.

groundhog wrote:

Dang Bobby, I just got home from saturdays ride. Met up with some folks and rode Pennicle creek and Hatfield sunday. My machine started back fireing and threw a code PO336 (crankshaft sensor). Barely made it back to the blue building. Can't ride it. Will try some dielectric grease on the connections. If that dosn't work then it's in for warranty work.

Hate to hear it groundhog. Keep us posted.

groundhog wrote:

Dang Bobby, I just got home from saturdays ride. Met up with some folks and rode Pennicle creek and Hatfield sunday. My machine started back fireing and threw a code PO336 (crankshaft sensor). Barely made it back to the blue building. Can't ride it. Will try some dielectric grease on the connections. If that dosn't work then it's in for warranty work.

Hate to hear that Roger but I'm going to guess you still wouldn't want to ride your RZR over your Wildcat

Well I'm sorry I waited this long to switch over.

everybody has problems that rides if u don't ride much you less likely to have problems

I will be there with atleast 2 ATVs and maybe another rzr. Will know for sure by Friday

Rick S wrote:

everybody has problems that rides if u don't ride much you less likely to have problems

Them famous last words...

I've never been down that way to ride and think I might come down for this one. Where do you folks meet?

depends on work I may be in as well!

bvilleer wrote:

I've never been down that way to ride and think I might come down for this one. Where do you folks meet?

In Matoaka on Rt 10 right across from the Fire Dept and you can also park in the grass under the Matoaka Diner sign you can't miss it there is not much there