Educate me on springs

Ok, I see a lot of you guys replace your springs because of sag.

1. What does spring sag look like or feel like?
2. Do you replace all of them or just front springs?
3. What brand, spring rate and cost?
4. Is it hard to replace springs?
5. What about buying shocks with springs already on them?

Sorry for all the questions but I dont know on this topic!!!

go out to your RZR and lift the front up untill the shocks top out. then press down on the front and see how high it come back up. if there is sag the springs will not push back up much.

i replaced all 4 springs with high lifter springs on my LE. 200$
super atv has a set that are the same as the high lifter spring and a little cheaper. makin trax has a nice set out that i hear good things about but there 400$$

shoud take about an hr or so to change a set of springs.

replacings the shocks with aftermarket will get you the best ride but are $$$$$$

Steve, if your interested in some highlifter springs. Make me a offer.

simoniz wrote:

Steve, if your interested in some highlifter springs. Make me a offer.

Hey Mark do ya still have them? I thought I had first dibs way back when....

Personally I have Highlifters on my RZR, they are really firm, even turned down, When I change spring again or get some for the "S" I will be looking a a progressive rate spring. It my understanding that the harder you work them the firmer they get, but during normal riding they ride fairly soft.

I went with the Making trax springs - seriously gave me ground clearance and the ride is smooth. Best $$ I have spent, if I had to do it over I would not need the lift kit with these springs