itp beadlock wheels

well my beadlock wheels are loosing air.has anybody else had any problems?I don't want to use slime if possible.the bolts are still torqued

Clay, I know this is going back to basic's but could it be from the valve stems? They stick out and get pushed/moved around quite a bit.

Try tighting or replacing the stem also .

well i aired them up and put some soapy water on them,it's coming from the bead area both front's are leaking.Iguess the next step is to break them down and look for dirt.More dang work

that sucks, I have heard of some tire shops adding some sort of black sticky substance that is said to seal the beads with no leaks. I don't know anything about it, maybe someone else does?

I've got 2 sets of beadlockers with no issue's at all!!

try useing clear pvc sealler when you put them back it does help

my rears leaked, brand new no dirt. I used clear 100% silicone on the bead and on the edge of the inner rim and one doesnt leak at all the other just a slight amount over a few weeks. my fronts never leaked any.

neuromax wrote:

that sucks, I have heard of some tire shops adding some sort of black sticky substance that is said to seal the beads with no leaks. I don't know anything about it, maybe someone else does?

I have had this done to one of my tires do to a hole being in the bead. Worked good for about 2 weeks of riding and then started leaking again. But for your problem it would probly work well.

Sorry I haven't gotten back to everyone. Thanks for all the replies and help. I broke them down today and found mud inside the beads. I noticed the torque was off, also. I had some new rings here, so I put them on. I am going to try these and see if this corrects the problem. Has anyone tried putting thread locker on the bolts (if you have had any work loose)? Just wondering, if it is an issue or not. Thanks again.