gain 10 mph on a rzr

i found this looking for a clutch pulling tool have any of u guys tried this????????

http://ezinearticles.com/?Polaris-RZR-Performance---Gain-10-Mph-For-Free&id=1293035

the hippos will be looking for more speed for sure now once again

I was reading about it on rzrforum and alot of people are saying that you loose bottom end power, but also there is guys saying they lost no power on the bottom end, I might try it sometime just to see if there is a difference

I have been thinking about doing this. For some reason my brothers stock RZR is toping out about 66 or 67 miles per hour. It has no performance mods on it at all. For 2 years we were about the same in top speed somewhere around 57, 58. Then his transmission screwed up on him and was worked on by the dealer under the extended warranty. Don't know what else could be causing it. Unless that spacer was removed by the dealer.

I do believe that most folks that remove the washer will only gain 5 mph. And you don't have to remove the clutch. Just heat up a old knife blade and cut/melt the plastic washer. Very easy mod.

the new ones dont have the washer....on the old ones it does not hurt the bottom end any

WV Hot Rod Rhino wrote:

the new ones dont have the washer....on the old ones it does not hurt the bottom end any

I think your right HHR...my 2010 W/E will run 62mph...

rayray wrote:

WV Hot Rod Rhino wrote:

the new ones dont have the washer....on the old ones it does not hurt the bottom end any

I think your right HHR...my 2010 W/E will run 62mph...

99% of the time My buddys gained 8-9 mph

WV Hot Rod Rhino wrote:

rayray wrote:

WV Hot Rod Rhino wrote:

the new ones dont have the washer....on the old ones it does not hurt the bottom end any

I think your right HHR...my 2010 W/E will run 62mph...

99% of the time My buddys gained 8-9 mph

I'm sorry I put that 62mph up there...I know that skeered the HIPPO a little bit...

I pulled mine and I lost a little on the bottom end but on the top end it made her 10mph faster

Ask HHR when I outran his butt for the third time!

TBONE21 wrote:

I pulled mine and I lost a little on the bottom end but on the top end it made her 10mph faster

Ask HHR when I outran his butt for the third time!

TBONE21 wrote:

I pulled mine and I lost a little on the bottom end but on the top end it made her 10mph faster

Ask HHR when I outran his butt for the third time!

you didnt lose no bottom...you didnt have any

how do you know about that jamestown?

I would have never thought that me doing some mods to the FO-FIDDY would have made all the RZR guys start looking for a little more speed!!!!
Ya'll must be riding alot of open roads or circle tracks! How fast do you really need to go trail riding??

atleast 85 mph and I will be happy.

if you remove it keep an eye on your motor mounts , if they go bad and the motor and trans become mis-alighned it can throw the belt at high speeds ! removing the spacer lets the belt ride higher in the shieves, changing the sprocket sizes basicly , (belt rides higher in the clutch shieve) . it should not hurt bottom end at all. this is what I read somewhere !

Ray Ray, mine would run 62 on the gps with the washer in. With the new clutch and no washer, I could lift the left front wheel on take off and get to 66 before lifting.

3012red wrote:

Ray Ray, mine would run 62 on the gps with the washer in. With the new clutch and no washer, I could lift the left front wheel on take off and get to 66 before lifting.

I hear ya...62 is fast enough for me...the only time that I have hit 62 was on the road that I live on...besides...I raced for 21 years...it's time to slow down...take it easy...drink a beer and smell the roses....or something like that..

Drink 3 beers and just forget about the durn flowers, or you will start to listen to to much M. Bolten and Elton John.

3012red wrote:

Drink 3 beers and just forget about the durn flowers, or you will start to listen to to much M. Bolten and Elton John.

M. Bolton and Elton John?????? Never heard of them....I am more of a classical music man my self...moatsark....baytoven...jondevoo...nothing but the best. My cooler only has crystal to drink and caviar to eat. That's my story and I'm sticking to it...

3012red wrote:

Ray Ray, mine would run 62 on the gps with the washer in. With the new clutch and no washer, I could lift the left front wheel on take off and get to 66 before lifting.

Wooo Wooo ... where's your wheelie video Red?!?!

rayray wrote:

3012red wrote:

Ray Ray, mine would run 62 on the gps with the washer in. With the new clutch and no washer, I could lift the left front wheel on take off and get to 66 before lifting.

I hear ya...62 is fast enough for me...the only time that I have hit 62 was on the road that I live on...besides...I raced for 21 years...it's time to slow down...take it easy...drink a beer and smell the roses....or something like that..

What did you race 1/4 midgets ... I think the only racing you do is to the bottom of a beer bottle

Get him Jamestown!

WV Hot Rod Rhino wrote:

rayray wrote:

3012red wrote:

Ray Ray, mine would run 62 on the gps with the washer in. With the new clutch and no washer, I could lift the left front wheel on take off and get to 66 before lifting.

I hear ya...62 is fast enough for me...the only time that I have hit 62 was on the road that I live on...besides...I raced for 21 years...it's time to slow down...take it easy...drink a beer and smell the roses....or something like that..

What did you race 1/4 midgets ... I think the only racing you do is to the bottom of a beer bottle

What did I race???? Playstation man...get real...as far as drinking beer...I never touch the stuff...

Its just to durn hard to take a vid of the front wheel while drivein. The guys at Hillbilly power sports saw me do it in the alley behind their shop. And the owner at the PoPo dealership in princeton had me launch it in his parking lot. He said that he had never seen a RZR run or sound like the Joker. Am putting in the new throttle cable today, so somebody needs to buy it and get famous!!!!