Update on Pro Armor Doors/Slam Latches

After having my pro armor doors with slam latches work flawless for about 6 months, all of a sudden my drivers side door started popping open while riding out at east lynn. I decided to put automotive style bear claw latches on it to make sure they wouldn't pop open.

looks like that oughtta

Were did you get them and how much fab work?

http://www.speedwaymotors.com/Slim-Line-Bear-Jaw-Door-Latch,2268.html

the strikers are lower on the page.

I had to take a piece of 1"x3" steel to go between the latch and the piece on the pro armor frame where the other latches were to make the holes line up. Maybe an hour total time. you need some short recessed head bolts(1/2" lone) and 2 1.5" bolts per side to attach the latches and you will need a couple washers and nuts to fit the strikers.

If you weld, all can be welded too, but I don't weld to I just bolted it up.