RZR ADR axles from Super ATV

Has anyone used the ADR axles from Super ATV for the RZR? I have a bad cv joint and it's 180.00 for that joint from my local dealer. The ADR axle is only 109.95. Just looking for info on these axles, if anyone knows anything about them let me know.

Thunter wrote:

Has anyone used the ADR axles from Super ATV for the RZR? I have a bad cv joint and it's 180.00 for that joint from my local dealer. The ADR axle is only 109.95. Just looking for info on these axles, if anyone knows anything about them let me know.

PM wv hot rod rhino...he should know....

I heard about them from one of my friends one time. They were ok. Worth a try

TBONE21 wrote:

I heard about them from one of my friends one time. They were ok. Worth a try

Thanks I was gonna try them unless I heard alot of bad info them. I scoured sevaral boards but couldn't find where anybody said anything about them, good or bad. Most guys were opting to spend another $100.00 per axle on the Rhino axles. However there were alot of complaints about them breaking. I'll probably give the cheaper ADR axles a try, I mean someone's gotta be the guinea pig, right.

The guys breaking the rhinos are mostly the hard core mud guys with the HUGE lifts and giant extreme mud tires. Get to spinning those huge tires in a deep mud hole, hit a root or a rock and some thing is gonna give! And it ismostly the axle. Those guys also break the high dollar axles, but they just feel so durn good in being able to say that they have the best axles,i.e.the ones that cost the mostest.

Thunter wrote:

TBONE21 wrote:

I heard about them from one of my friends one time. They were ok. Worth a try

Thanks I was gonna try them unless I heard alot of bad info them. I scoured sevaral boards but couldn't find where anybody said anything about them, good or bad. Most guys were opting to spend another $100.00 per axle on the Rhino axles. However there were alot of complaints about them breaking. I'll probably give the cheaper ADR axles a try, I mean someone's gotta be the guinea pig, right.

Guinea pig!!!!!!! now you done got my goat riled up.....

I am sure they are fine. If theres no word on them then its probably ok. I would try it

Thunter wrote:

Has anyone used the ADR axles from Super ATV for the RZR? I have a bad cv joint and it's 180.00 for that joint from my local dealer. The ADR axle is only 109.95. Just looking for info on these axles, if anyone knows anything about them let me know.

You just got two new front axles I have rears also if you need them.

3012red wrote:

The guys breaking the rhinos are mostly the hard core mud guys with the HUGE lifts and giant extreme mud tires. Get to spinning those huge tires in a deep mud hole, hit a root or a rock and some thing is gonna give! And it ismostly the axle. Those guys also break the high dollar axles, but they just feel so durn good in being able to say that they have the best axles,i.e.the ones that cost the mostest.

Thats right....but thank the lord we don't have no hard core mudders in our group....

RZR_Joe wrote:

Thunter wrote:

Has anyone used the ADR axles from Super ATV for the RZR? I have a bad cv joint and it's 180.00 for that joint from my local dealer. The ADR axle is only 109.95. Just looking for info on these axles, if anyone knows anything about them let me know.

You just got two new front axles I have rears also if you need them.

Rzr Joe...are these stock rzr axles....

bubba53 wrote:

3012red wrote:

The guys breaking the rhinos are mostly the hard core mud guys with the HUGE lifts and giant extreme mud tires. Get to spinning those huge tires in a deep mud hole, hit a root or a rock and some thing is gonna give! And it ismostly the axle. Those guys also break the high dollar axles, but they just feel so durn good in being able to say that they have the best axles,i.e.the ones that cost the mostest.

Thats right....but thank the lord we don't have no hard core mudders in our group....

Yea right!

3012red wrote:

The guys breaking the rhinos are mostly the hard core mud guys with the HUGE lifts and giant extreme mud tires. Get to spinning those huge tires in a deep mud hole, hit a root or a rock and some thing is gonna give! And it ismostly the axle. Those guys also break the high dollar axles, but they just feel so durn good in being able to say that they have the best axles,i.e.the ones that cost the mostest.

It's not about being able to say you have the best most expensive axles. I broke a stock axle while rock crawling at Callalantee. So when it was time to uprade the suspension I got Rhino axles. I know the stock would not be up to the task of handing what I put them through rock crawling. The best part about them is they are guarenteed not to break and they will replace if they do.

RZR_Joe wrote:

3012red wrote:

The guys breaking the rhinos are mostly the hard core mud guys with the HUGE lifts and giant extreme mud tires. Get to spinning those huge tires in a deep mud hole, hit a root or a rock and some thing is gonna give! And it ismostly the axle. Those guys also break the high dollar axles, but they just feel so durn good in being able to say that they have the best axles,i.e.the ones that cost the mostest.

It's not about being able to say you have the best most expensive axles. I broke a stock axle while rock crawling at Callalantee. So when it was time to uprade the suspension I got Rhino axles. I know the stock would not be up to the task of handing what I put them through rock crawling. The best part about them is they are guarenteed not to break and they will replace if they do.

Is the rhino axle the same quailty as a gorilla axle....thanks

They should be

Made out of the same steel.

3012red wrote:

Made out of the same steel.

Thanks..

Well I tried to order the ADR axles from Super ATV today but they are outta stock. I'm gonna call them tomorrow and see how long it'll be before they get more in.

My dad did order a power steering unit from Super ATV today for his RZR-S. $559.00 out the door is really hard to beat!!! Hopefully it holds up good!!

I looked into mine today also, looks like I will keep the old axle and repack it with a new boot..... keep it as a spare and order a new axle with both ends... can anyone please explain why I can buy a complete half shaft with CV's ready to stick in cheaper than I can replace one end through Polaris????

ElmoEOD wrote:

I looked into mine today also, looks like I will keep the old axle and repack it with a new boot..... keep it as a spare and order a new axle with both ends... can anyone please explain why I can buy a complete half shaft with CV's ready to stick in cheaper than I can replace one end through Polaris????

Which end is bad? I am a front where the outer CV pops but the inside CV & axle shaft is still good. Your welcome to it if it helps. It no fit mine no more LOL

RZR_Joe wrote:

ElmoEOD wrote:

I looked into mine today also, looks like I will keep the old axle and repack it with a new boot..... keep it as a spare and order a new axle with both ends... can anyone please explain why I can buy a complete half shaft with CV's ready to stick in cheaper than I can replace one end through Polaris????

Which end is bad? I am a front where the outer CV pops but the inside CV & axle shaft is still good. Your welcome to it if it helps. It no fit mine no more LOL

Inner right rear... Thunter's and mine... weeks apart, not related... but thanks for the offer

Elmo I got 5000 miles on mine, whats your excuse? J/K

Thunter wrote:

Elmo I got 5000 miles on mine, whats your excuse? J/K

Elmo15 (son) was driving, ( bet it happened in the hole we watched 2 rzr's get winched out, I made it on 2nd try in Jetdriver's rzr, and he made it 2nd try in mine (fully stock I might add)) that's my story and I'm sticking to it.

That's what a EoD man does blow shit up.

ElmoEOD wrote:

I looked into mine today also, looks like I will keep the old axle and repack it with a new boot..... keep it as a spare and order a new axle with both ends... can anyone please explain why I can buy a complete half shaft with CV's ready to stick in cheaper than I can replace one end through Polaris????

It pays to shop around now a days...its always been like that...your gonna pay more for a dealer item...