Front to back length of a RZR

Subject: Front to back length of a RZR June 5th 2009, 9:40 am

What is the total length of a RZR front to back? It doesn't exceed 110" does it?

Guest

Overall length, 102 in. The S is 106 in. thumbs up

Subject: Re: Front to back length of a RZR June 5th 2009, 10:28 am

Unless you have prerunner bumpers - just ask GETERDUN about mine Front to back length of a RZR 550457

Guest

:yea that: Your right, i should of noted that. Since i've got the front bumper and now own Getereduns' old trailer!

Subject: Re: Front to back length of a RZR June 5th 2009, 10:44 am

Well, with my Rhino in my trailer I have about 109-110" to spare (and that is using the V-nose portion too). My biggest obstacle is going to be the roll cage. How far back from the nose of the RZR does the cage start? I have a table built up in the V and I don't know if it will interfere or not.

Subject: Re: Front to back length of a RZR June 5th 2009, 10:46 am

BTW, the pre-runner bumper is what I like, but I don't think I could swing it. Maybe I could get someone to fab me up some kind of a quick disconnect if I actually do buy the RZR. Right now I am on the hunt for a RZR.......but biding my time. I am trying to find a good deal. I want the S.

Guest

The cage is roughly 24 in. from the nose, not including the bumper. Also 39 in. high at that point, roughly. How tall is the table? Have you been in a S? :79:

Subject: Re: Front to back length of a RZR June 5th 2009, 1:21 pm

Never been in an S. I am afraid to get in one until I know I can buy one.

The table is tall enough that the King Quad can completely go up under there (including the light pod which is the tallest point).

Subject: Re: Front to back length of a RZR June 5th 2009, 11:11 pm

Little trick I do to my sons 70cc atv , going up shortens the distance in length , so make you some ramps that you can remove when camping in the trailer ( like truck ramps ) that have divits in the top ( to hold the tire in place ) and lock it down as normal . This also lowers the rear so another machine can come up closer .

Subject: Re: Front to back length of a RZR June 9th 2009, 9:03 am

I have considered that too. Only problem is I have a table built up in the front so I cannot raise the front of the machine that goes in first unless I remove it.

» 08 ranger RZR 800 front end
» Looking for RZR front rim
» Front Diff ?
» Another broken front hub
» looking for front bumper