| Generac gen set | |
|
|
|
Author | Message |
---|
3012red
Number of posts : 833 Location : Bushnell, Fl Registration date : 2009-09-14
| Subject: Generac gen set October 25th 2011, 7:42 pm | |
| Well, my luck seems to stay the same. I couldn't get my gen set to start in the toy hauler last week. After lookin and pokein around, it would seem that it has no compression. The valves seem to be working and are set at the right adjustment. Put your finger in the spark plug hole and it just don't try to push your finger out of there. Any body want to come on down and pull that thing out so I can look at the rings and head gasket???? And my rear axle seals are out again! But at least I've changed enough of them to get that job done pretty quick, but that durn crummy Generac gen set not genning is about to cause me to pull out what lil hair I got left. | |
|
| |
GETERDUN
Number of posts : 1040 Age : 61 Location : Sabina, Ohio Registration date : 2009-02-10
| |
| |
Guest Guest
| Subject: Re: Generac gen set October 25th 2011, 8:52 pm | |
| I was about to say the same thing Kev!! |
|
| |
bubba53 Moderator
Number of posts : 12045 Age : 70 Location : statesville,nc Registration date : 2009-08-29
| |
| |
clayb
Number of posts : 580 Age : 54 Location : mount holly, nc Registration date : 2009-03-03
| Subject: Re: Generac gen set October 25th 2011, 11:20 pm | |
| | |
|
| |
Carolinarhino
Number of posts : 1712 Age : 53 Location : Statesville, N.C. Registration date : 2010-08-19
| Subject: Re: Generac gen set October 25th 2011, 11:37 pm | |
| Wow!! Rear axle seals!! Is that a problem on the RZR'S?? Get you a diesel generator and all your worries will be gone!!
Sounds like you may have a small piece of carbon stuck under a valve! I have seen that on some of the twin cyl briggs! Thats the truth!!!!! | |
|
| |
3012red
Number of posts : 833 Location : Bushnell, Fl Registration date : 2009-09-14
| Subject: Re: Generac gen set October 26th 2011, 9:30 am | |
| Put the Miller Lite down??? Are you crazy and on drugs??? I will put it down when Kevin steps away from the apple pie!! | |
|
| |
3012red
Number of posts : 833 Location : Bushnell, Fl Registration date : 2009-09-14
| Subject: Re: Generac gen set October 27th 2011, 12:43 pm | |
| Well, it just keeps comeing!! I went to move the toy hauler to the other end of the hosue so I could plug it in and pre cool the reefer. The Big Red Rocket started kinda funny, went about 30 feet and died. Checked wires, fuses, and have decided that my FASS pump that is under the bed has given up and won't pump any fuel. I'm getting current to it, and I even grounded it with my jumper cables, but no go. So, I guess I ain't in as big a hurry as I thought to get the rear axle seals put in the Joker. Was gonna leave tomorrow to go back up to Ocala. That Miller Lite is starting to look mighty tempting!! [email=&%$@@#%(^%$]&%$@@#%(^%$[/email] the bad luck. | |
|
| |
Guest Guest
| Subject: Re: Generac gen set October 27th 2011, 1:00 pm | |
| sorry to hear! Its always something aint it. |
|
| |
3012red
Number of posts : 833 Location : Bushnell, Fl Registration date : 2009-09-14
| Subject: Re: Generac gen set October 27th 2011, 1:03 pm | |
| Yup, sure is!!! Since I got hurt in 07, it seems like it has been a loooooooong slide down hill since. | |
|
| |
bubba53 Moderator
Number of posts : 12045 Age : 70 Location : statesville,nc Registration date : 2009-08-29
| Subject: Re: Generac gen set October 28th 2011, 9:28 am | |
| - 3012red wrote:
- Yup, sure is!!! Since I got hurt in 07, it seems like it has been a loooooooong slide down hill since.
I thought the brain surgery fixed that.... | |
|
| |
3012red
Number of posts : 833 Location : Bushnell, Fl Registration date : 2009-09-14
| Subject: Re: Generac gen set October 28th 2011, 9:54 am | |
| I guess that it just didn't take! | |
|
| |
bubba53 Moderator
Number of posts : 12045 Age : 70 Location : statesville,nc Registration date : 2009-08-29
| |
| |
Guest Guest
| |
| |
3012red
Number of posts : 833 Location : Bushnell, Fl Registration date : 2009-09-14
| Subject: Re: Generac gen set October 28th 2011, 10:26 am | |
| You two knuckle draggers need to keep your lil bittey minds on how to get down here and get my wore out stuff up and running!!! It is misting rain here and the rest of the group is heading up to Ocala without me. I hope a big black bear grabs them and that the old red neckey bar burns to the ground. | |
|
| |
bubba53 Moderator
Number of posts : 12045 Age : 70 Location : statesville,nc Registration date : 2009-08-29
| |
| |
3012red
Number of posts : 833 Location : Bushnell, Fl Registration date : 2009-09-14
| Subject: Re: Generac gen set October 29th 2011, 6:06 pm | |
| Welp, I got it pinned down to a blown head gasket. One of the head bolts wasn't tight enough. I got all of those blasted panels that cover up the motor off. Got the intake and head loosened up, but the exhaust is giveing me fits. Got one bolt loose, but the other allen head bolt is right above the tube frame. I'm gonna try to take the whole muffler off can see if I can slide the head off with the head pipe still hooked up. And the Gators are actually ahead of the Dawgs!!! Go Gators Go!!! CHOMP CHOMP | |
|
| |
Guest Guest
| Subject: Re: Generac gen set October 29th 2011, 7:20 pm | |
| Keep at it! It will get better! Glad you locatd the issue! |
|
| |
rayray Moderator
Number of posts : 6335 Age : 58 Location : statesville,nc Registration date : 2010-08-15
| Subject: Re: Generac gen set October 29th 2011, 8:19 pm | |
| | |
|
| |
3012red
Number of posts : 833 Location : Bushnell, Fl Registration date : 2009-09-14
| Subject: Re: Generac gen set October 29th 2011, 9:08 pm | |
| It is all the fault of those lousy gators, who just managed to lose 4 in a row!!! | |
|
| |
rayray Moderator
Number of posts : 6335 Age : 58 Location : statesville,nc Registration date : 2010-08-15
| Subject: Re: Generac gen set October 29th 2011, 9:09 pm | |
| 4 in a row ?.....that sux!! | |
|
| |
3012red
Number of posts : 833 Location : Bushnell, Fl Registration date : 2009-09-14
| Subject: Re: Generac gen set October 29th 2011, 9:37 pm | |
| Ya gotta be tough to be a Gators fan these days!! | |
|
| |
bubba53 Moderator
Number of posts : 12045 Age : 70 Location : statesville,nc Registration date : 2009-08-29
| Subject: Re: Generac gen set October 29th 2011, 10:13 pm | |
| - 3012red wrote:
- Ya gotta be tough to be a Gators fan these days!!
Thats right... | |
|
| |
rayray Moderator
Number of posts : 6335 Age : 58 Location : statesville,nc Registration date : 2010-08-15
| Subject: Re: Generac gen set October 29th 2011, 10:50 pm | |
| - 3012red wrote:
- Ya gotta be tough to be a Gators fan these days!!
They're kinda like T-bone VS mudholes....loses every time... | |
|
| |
3012red
Number of posts : 833 Location : Bushnell, Fl Registration date : 2009-09-14
| Subject: Re: Generac gen set October 29th 2011, 11:29 pm | |
| | |
|
| |
bubba53 Moderator
Number of posts : 12045 Age : 70 Location : statesville,nc Registration date : 2009-08-29
| Subject: Re: Generac gen set October 30th 2011, 8:04 am | |
| | |
|
| |
3012red
Number of posts : 833 Location : Bushnell, Fl Registration date : 2009-09-14
| Subject: Re: Generac gen set November 30th 2011, 7:24 pm | |
| A pal helped me pull the whole gen set out of the camper today. We got the head off and found a valve seat had slipped so far that the valve wouldn't close. Am going to Ocala tomorrow and see if I can find a place to price out a new head for it. I looked on the web site for dealers, and the few that answered the phone don't sound any brighter than I am!!! I'm sure that tomorrow is going to cause me some more grief. | |
|
| |
bubba53 Moderator
Number of posts : 12045 Age : 70 Location : statesville,nc Registration date : 2009-08-29
| Subject: Re: Generac gen set December 1st 2011, 11:15 am | |
| - 3012red wrote:
- A pal helped me pull the whole gen set out of the camper today. We got the head off and found a valve seat had slipped so far that the valve wouldn't close. Am going to Ocala tomorrow and see if I can find a place to price out a new head for it. I looked on the web site for dealers, and the few that answered the phone don't sound any brighter than I am!!! I'm sure that tomorrow is going to cause me some more grief.
Man...I'm so glad your getting that gen fixed....you wouldn't believe how much sleep I have lost over this issue.... | |
|
| |
Guest Guest
| Subject: Re: Generac gen set December 1st 2011, 11:50 am | |
| - bubba53 wrote:
- 3012red wrote:
- A pal helped me pull the whole gen set out of the camper today. We got the head off and found a valve seat had slipped so far that the valve wouldn't close. Am going to Ocala tomorrow and see if I can find a place to price out a new head for it. I looked on the web site for dealers, and the few that answered the phone don't sound any brighter than I am!!! I'm sure that tomorrow is going to cause me some more grief.
Man...I'm so glad your getting that gen fixed....you wouldn't believe how much sleep I have lost over this issue.... Lose sleep? |
|
| |
bubba53 Moderator
Number of posts : 12045 Age : 70 Location : statesville,nc Registration date : 2009-08-29
| Subject: Re: Generac gen set December 1st 2011, 11:57 am | |
| - TBONE21 wrote:
- bubba53 wrote:
- 3012red wrote:
- A pal helped me pull the whole gen set out of the camper today. We got the head off and found a valve seat had slipped so far that the valve wouldn't close. Am going to Ocala tomorrow and see if I can find a place to price out a new head for it. I looked on the web site for dealers, and the few that answered the phone don't sound any brighter than I am!!! I'm sure that tomorrow is going to cause me some more grief.
Man...I'm so glad your getting that gen fixed....you wouldn't believe how much sleep I have lost over this issue.... Lose sleep? You know...trying to figure out whats wrong with the darn thing... | |
|
| |
Sponsored content
| Subject: Re: Generac gen set | |
| |
|
| |
| Generac gen set | |
|