| Help!!!!!! | |
|
+5rayray punder big g bubba53 Charley brosius 45 9 posters |
Author | Message |
---|
Charley brosius 45
Number of posts : 28 Location : Jane lew wv Registration date : 2012-02-02
| Subject: Help!!!!!! February 19th 2012, 5:29 pm | |
| I was riding my rzr and shut it off and all it dose is click battey is band new tried to jump it and nothing and it has power solenoid clicks. Hel me if u can thanks | |
|
| |
bubba53 Moderator
Number of posts : 12045 Age : 71 Location : statesville,nc Registration date : 2009-08-29
| Subject: Re: Help!!!!!! February 19th 2012, 5:32 pm | |
| That happened to me once...ended up being dirty battery cables....also check all your ground wires under the drivers seat.... | |
|
| |
Charley brosius 45
Number of posts : 28 Location : Jane lew wv Registration date : 2012-02-02
| Subject: Re: Help!!!!!! February 19th 2012, 5:41 pm | |
| | |
|
| |
Charley brosius 45
Number of posts : 28 Location : Jane lew wv Registration date : 2012-02-02
| Subject: Re: Help!!!!!! February 19th 2012, 5:56 pm | |
| I just checked the wires they wsnt loose | |
|
| |
big g
Number of posts : 3689 Age : 65 Location : Stokesdale N.C-HillTop WVA Registration date : 2010-02-04
| Subject: Re: Help!!!!!! February 19th 2012, 6:09 pm | |
| COULD BE THAT STARTER IS LOCKING UP | |
|
| |
Charley brosius 45
Number of posts : 28 Location : Jane lew wv Registration date : 2012-02-02
| Subject: Re: Help!!!!!! February 19th 2012, 6:37 pm | |
| Iv never had that problem bf thoe It just dont stop like that ?? I dont think | |
|
| |
Guest Guest
| Subject: Re: Help!!!!!! February 19th 2012, 6:54 pm | |
| |
|
| |
punder
Number of posts : 1849 Age : 56 Location : Winston Salem NC Registration date : 2009-02-22
| Subject: Re: Help!!!!!! February 19th 2012, 7:00 pm | |
| Use something long and hard ( like a pole or pry bar ) , thru your driverside wheel well look thru to the center of the machine , its hard to see at first but you will see the started it is about as bg as a soda can ... Try tapping on it pretty firm then try turnign over ... | |
|
| |
big g
Number of posts : 3689 Age : 65 Location : Stokesdale N.C-HillTop WVA Registration date : 2010-02-04
| Subject: Re: Help!!!!!! February 19th 2012, 7:09 pm | |
| IF IT WAS RUNNING AND CUT OFF R U SURE MOTOR ISN,T LOCKED UP | |
|
| |
rayray Moderator
Number of posts : 6335 Age : 58 Location : statesville,nc Registration date : 2010-08-15
| Subject: Re: Help!!!!!! February 19th 2012, 7:26 pm | |
| A bad starter will not cause it to shut down while running...sounds like a bad wire somewhere. Also check all fuses. | |
|
| |
punder
Number of posts : 1849 Age : 56 Location : Winston Salem NC Registration date : 2009-02-22
| Subject: Re: Help!!!!!! February 19th 2012, 8:04 pm | |
| I read it as he shut it off and now it will not crank just hearing the solenod hit ... you either have low voltage or the starter is hung in a place that i can not work its self out of or is full of grit /moisture... Tapping it helps it get unhung ( sometimes ) ... I know of a RZR 4 that was less than 6 months old that this happened , it is still working today ... | |
|
| |
rayray Moderator
Number of posts : 6335 Age : 58 Location : statesville,nc Registration date : 2010-08-15
| Subject: Re: Help!!!!!! February 19th 2012, 8:29 pm | |
| - punder wrote:
- I read it as he shut it off and now it will not crank just hearing the solenod hit ... you either have low voltage or the starter is hung in a place that i can not work its self out of or is full of grit /moisture... Tapping it helps it get unhung ( sometimes ) ... I know of a RZR 4 that was less than 6 months old that this happened , it is still working today ...
ooops...Your right....starter for sure.....ok...tomorrow I'll get hooked on phonics... | |
|
| |
groundhog
Number of posts : 1005 Age : 80 Location : Laurel, maryland Registration date : 2011-01-29
| Subject: Re: Help!!!!!! February 19th 2012, 8:37 pm | |
| Try jumping the selenoid with a screw driver or something. | |
|
| |
Charley brosius 45
Number of posts : 28 Location : Jane lew wv Registration date : 2012-02-02
| Subject: Re: Help!!!!!! February 19th 2012, 8:46 pm | |
| I tried jumping the selenoid it just sparks and nothing. Ya guys i wss tifing it all day and I shut it of 5/6 times and it wsd fine. Then when i was getting ready to load it in the truck it wouldnt start just click. Iv had this problem with atvs and it wasnt the starter it was the selenoid I just dont know much about the rzrs Ill try tapping on it tom Is the starter a B$$$h to change ? Thank guys | |
|
| |
Charley brosius 45
Number of posts : 28 Location : Jane lew wv Registration date : 2012-02-02
| Subject: Re: Help!!!!!! February 19th 2012, 8:47 pm | |
| Oh ya and the starter doesnt even try to crank. I put my hand on it and u cant feel nothing. Ya know like its trying to move | |
|
| |
groundhog
Number of posts : 1005 Age : 80 Location : Laurel, maryland Registration date : 2011-01-29
| Subject: Re: Help!!!!!! February 19th 2012, 8:56 pm | |
| A couple of bolts from the drivers side. I think 10 mm with extension.. Broom handle or something similar to tap it out from the rear under the bed. Grease the "o" ring before you tap it back in. Takes about 20 minutes if you are in no hurry. Get starter off ebay..
I bought a starter from these guys, been useing it for six months. Check the link..
http://www.ebay.com/itm/Polaris-ATV-STARTER-Ranger-4x4-6x6-RZR-XP-700-800-05-09-/360405308371?pt=Motors_ATV_Parts_Accessories&hash=item53e9d493d3&vxp=mtr | |
|
| |
bubba53 Moderator
Number of posts : 12045 Age : 71 Location : statesville,nc Registration date : 2009-08-29
| Subject: Re: Help!!!!!! February 19th 2012, 9:49 pm | |
| - Charley brosius 45 wrote:
- I just checked the wires they wsnt loose
You have to loosen the wires and wiggle them and then retighten....it sounds like you got a bad ground...check the voltage on your battery, something could be running it down... | |
|
| |
Charley brosius 45
Number of posts : 28 Location : Jane lew wv Registration date : 2012-02-02
| Subject: Re: Help!!!!!! February 19th 2012, 10:01 pm | |
| Ok thanks guys. Ill try all this stuff in the morning i hope it works if not ill get a starter and selenoid | |
|
| |
Bobby D
Number of posts : 14579 Location : Blacksburg,Va Registration date : 2009-02-08
| |
| |
punder
Number of posts : 1849 Age : 56 Location : Winston Salem NC Registration date : 2009-02-22
| Subject: Re: Help!!!!!! February 19th 2012, 11:16 pm | |
| I would make sure it has 12 volt , and cables tight , and no codes before I change the starter... | |
|
| |
Charley brosius 45
Number of posts : 28 Location : Jane lew wv Registration date : 2012-02-02
| Subject: Re: Help!!!!!! February 19th 2012, 11:23 pm | |
| Codes ? The check eng light is on what do i have to get to read the code | |
|
| |
punder
Number of posts : 1849 Age : 56 Location : Winston Salem NC Registration date : 2009-02-22
| Subject: Re: Help!!!!!! February 19th 2012, 11:31 pm | |
| You have onboard Dionostic system... In your book there is a procedure ... It like Key switch on and off 3 times while holding the scoll button , then wait ... it will show you any codes the computer has thrown .. what the codes mean is in the book with the procedure... Hate to see you spend money you don't need too... | |
|
| |
Charley brosius 45
Number of posts : 28 Location : Jane lew wv Registration date : 2012-02-02
| Subject: Re: Help!!!!!! February 19th 2012, 11:53 pm | |
| Thanks alot man. It wont say the starter is F'ed will it lol. The check eng light is that a sign to check for a code i wonder ? And afain thank alot for all your gus help | |
|
| |
porkchop
Number of posts : 576 Age : 61 Location : Rock Hill S.C. Registration date : 2009-02-13
| Subject: Re: Help!!!!!! February 20th 2012, 1:03 am | |
| was you riding in real cold weather ? is so put a small heater around the starter as close as you can then try it ! we had one freeze up put a little heat on it and it worked fine ! | |
|
| |
Gadget
Number of posts : 1464 Location : Hillsboro, Ohio Registration date : 2009-05-07
| |
| |
Charley brosius 45
Number of posts : 28 Location : Jane lew wv Registration date : 2012-02-02
| Subject: Re: Help!!!!!! February 20th 2012, 5:07 pm | |
| Well guys thanks its out of my hand now it was throwing codes 22-54-56 its at lemon barrets now. Thsnks again | |
|
| |
Sponsored content
| Subject: Re: Help!!!!!! | |
| |
|
| |
| Help!!!!!! | |
|