rzr motor rebuild

fun stuff

That's mine

How many of those have you guys done? Just curious.

lets see. if we went creek ridin and the water was so deep that you had to bail out to save your life and the rzr got washed away. ....you could ride back with me!!

launch22 wrote:

lets see. if we went creek ridin and the water was so deep that you had to bail out to save your life and the rzr got washed away. ....you could ride back with me!!

Been there and done that back in 2003 I sank a 2 week old Sportsman 500H0 and you could not even see it so I left it and rode double back to the truck

That's not pretty Bobby. At least it didn't happen during the Spring ride. You'll be good as new (and broke) when they finish. good luck

Mikebike4 wrote:

That's not pretty Bobby. At least it didn't happen during the Spring ride. You'll be good as new (and broke) when they finish. good luck

I was going to have to do it sooner or later so it's good it happened when it did so I can ride the rest of the year hopefully

with no more problems

How much does something like that cost to repair?

Steve K wrote:

How much does something like that cost to repair?

It's a secret because I'm embarrassed

hope you get back up and running soon.

rod was about to let loose,
its hard to see in the picture but the rod hole around the crank is expanded and you can easily shake it around, and im not talking about a few thousands i mean like 1/4" -5/16' it was bad

ordered parts,
crank
two piston kits
cylinder
and all gaskets/bearings/seals

Dang Bobby you might have to get a rhino,not as fast but like a timeX it keeps on ticking I know Hope you get it running soon that yeller rzr is like a land mark in them there hills

all parts where in stock with polaris and on the way, we are TRYING to do a one week turn around on the motor rebuild. but no promises

WAIT that should be covered by the new obama care!!! every thing else is!!

Bobby, hope they get you going soon.

Stealth wrote:

Bobby, hope they get you going soon.

CarolinaPolaris wrote:

rod was about to let loose,
its hard to see in the picture but the rod hole around the crank is expanded and you can easily shake it around, and im not talking about a few thousands i mean like 1/4" -5/16' it was bad

ordered parts,
crank
two piston kits
cylinder
and all gaskets/bearings/seals

what would cause something like that to happen

I would big bore ,stroke,and cam it no time like now when mine lets go thats on the list of to do items im having a hard time not doing it now good luck with the rebuild

I have to give credit to Dustin and Carolina Polaris I dropped it off Saturday and they jumped on it Monday morning and called me and gave me the run down and ordered the parts the same day

Gary wrote:

Dang Bobby you might have to get a rhino,not as fast but like a timeX it keeps on ticking I know Hope you get it running soon that yeller rzr is like a land mark in them there hills

Gary Thanks but I will just keep my RZR more

but for sure to keep it going

Glad to hear of the quickness of getting to it. Sounds like you will be back up & going soon

Hope they get it fixed soon, give you a little time to break it back in before the Spring ride.

as we did alittle deeper while waiting for parts to come in


this is a shot to compair what the rod is and is not supposed to look like

how many miles on that motor ,Bobby D?

Donnie wrote:

how many miles on that motor ,Bobby D?

5,000 but I think if I had not had the dust ingestion problem from the beginning and had not had two top end rebuilds where it never did get to where it would not use oil.I don't think I would have had this problem.It was using alot of oil and I'm sure it ran low on oil alot by the time I got done riding each day

Bobby I went by Carolina Polaris this morning & had to check out your famed yellow RZR. That is 1 tough ride ! Never before have I seen a engine connecting rod that stretched out literally egg shaped around the crank & not break. By all means that baby should have grenaded into a 1000 pieces but it hung tough. Don't worry though my buddies there will get you all fixed up & back on the trails in record time!

that looks bad!!!

thats going to be a new motor when there done. but i agree with va.redneckrazor , should of had them put a big bore kit in it.

bush wrote:

that looks bad!!!

thats going to be a new motor when there done. but i agree with va.redneckrazor , should of had them put a big bore kit in it.

It's fast enough stock for me and I don't like messing with my stuff as far as mods when it comes to

the engine but that's just me

hey Bobby you selling store bought or fresh farm eggs

Gary wrote:

hey Bobby you selling store bought or fresh farm eggs

Store bought I don't have a Farm