Which Lift Kit do you recommend?

Finzup wrote:

yellowzx01 wrote:

Finzup wrote:

yellowzx01 wrote:

I wonder if that roktek lift would work with my LTE exhaust. I found that lift on ebay for $152 which isn't bad. I just wonder if it will fit with me exhaust

I had to relocate one bolt on my Roktek to accommodate my SuperTrapp. No big deal. Good lift kit. Didn't need it after buying SuperATV springs.

would you care to post a pic of yours from the rear so I can see it. I have the looney tuned duals and I think they may hit the mounts.

Don't have it anymore or I'd be glad to.

did you get to try the shocks

Pops wrote:

RHarrah wrote:

I have this one



from Sand Spectrums http://goracertech.com/index.php?cPath=14

I liked the design of it and it did not appear to change the geometry of the suspension. The only downside to it was you have to drill holes through the frame on the rear and align those holes on both sides of the frame tube.

A lot of the kits changed to angle of the springs. This kit actually moves the shock mounting point and ties everything together.

I just bought 2 sets like this they are on sale till midnight tonight.

Who/where has them on sale?

RHarrah wrote:

Pops wrote:

RHarrah wrote:

I have this one



from Sand Spectrums http://goracertech.com/index.php?cPath=14

I liked the design of it and it did not appear to change the geometry of the suspension. The only downside to it was you have to drill holes through the frame on the rear and align those holes on both sides of the frame tube.

A lot of the kits changed to angle of the springs. This kit actually moves the shock mounting point and ties everything together.

I just bought 2 sets like this they are on sale till midnight tonight.

Who/where has them on sale?

Racer Tech had them on sale,

one of the guys that i rode with at brimstone had the racertech lift and he had to take it off on the front because it broke in 3 pieces!!
he is a big guy like me and rides the rough stuff. when you compare it to the EMP lift the EMP is built with much thinker metal.

I would be curious to know where it broke at.

The front is about 3/8" thick at the shock mount tab. My wife & I come in close to 500 lbs plus another 100 lbs that is carried on the machine all the time and I run it hard and have had no problems. Even when I rolled the RZR & snapped the front hub off of the machine the lift kit did not give any.

it broke just past where the bolts go that mount it. just passed the stock shock bolt holes.
and its not the first i have heard about but the first i had seen.

His broke, but ive seen several racer tech ones that bent in that area including mine.

bush wrote:

it broke just past where the bolts go that mount it. just passed the stock shock bolt holes.
and its not the first i have heard about but the first i had seen.

you said "just past", inward or to the outward side of the stock bolt holes?