Which Lift Kit do you recommend?

Got the rzr cleaned up from the last ride.. ordered a better main skid plate, but now I want to give it more height.

I will stay with the factory size tires (Big Horn 25's) as I need to stay within 50" to run the trails here locally. I can't use spacers, so I need to stay with those tires..

what lift kit do you recommend? Which one won't cause any CV bind or issues, and will give me the best ride?

Please let me know

thanks
Gunpiot

I have the 3" roctech lift kit...it actually gives you 2" from the bottom of the skid plate to the ground and 1" in the fenderwell

Bubba, am I correct in you have to relocate your radiator overflow tank with the roktek, or was that your new shocks??
Also, did you use any limiting straps?

no, did not relocate anything, the roctech bolted right on. my new shocks actually fit better because of the roctech lift.

Thanks Bubba...

next question.. Does the Roktek change the angle enough I would have to run spacers to prevent wheel motor mount rub?

I have 26" tires on the back and have about 2" between the tire and the frame.but I also have offset rims.

I had the same Roktek lift kit before my SuperATV springs. Cheap, gets the job done, reinforces the shock mounting points. Just IMHO, change your springs. You don't need a lift kit. Shocks still suck though.

I went with the Roktek and have no complaints.

I have a cheap 2 in bracket lift. It bolts on the bottom of the shock. I also have some front aftermarket springs.

I run the super atv top mount lift and have had no problems. $129.00 and high lifter springs. www.superatv.com

Lots of great feedback.. thanks guys!

ohiofishman wrote:

I went with the Roktek and have no complaints.

Same here

Are these lift kits relatively easy to install yourself?

Very Simple. Even Tarheels can figure it out. Not sure ETSU's can do it though. javascript:emoticonp('') I had an after-market exhaust that I had to change the layout to accept.

TBONE21 wrote:

Are these lift kits relatively easy to install yourself?

Yes...even a goat can do it. Baaaaaaaaaaaaa!!!!!

Well good! When is your goat available to install my lift?

TBONE21 wrote:

Well good! When is your goat available to install my lift?

My goat likes bud light and jack daniels black label....if you can supply that...then I think I can talk him into installing your lift kit. Baaaaaaaaaaaaa!!!!

I heard u like Schlitz and Mad Dogg Orange Jubilee!!

TBONE21 wrote:

I heard u like Schlitz and Mad Dogg Orange Jubilee!!

BAAAAAAAAAAAAAAAAAAAAA!!!!!!!

bubba53 wrote:

TBONE21 wrote:

I heard u like Schlitz and Mad Dogg Orange Jubilee!!

BAAAAAAAAAAAAAAAAAAAAA!!!!!!!

Is it the 2 minute warning already?

for the reg. rzr i would go with the super atv or the roktek lift.

i had the superatv lift on my LE and it was a great lift. very strong and it can lift 1.5 or 3 inchs. the one i had on mine has survived on 2 totaled rzrs with no damge.

TBONE21 wrote:

bubba53 wrote:

TBONE21 wrote:

I heard u like Schlitz and Mad Dogg Orange Jubilee!!

BAAAAAAAAAAAAAAAAAAAAA!!!!!!!

Is it the 2 minute warning already?

I wonder if that roktek lift would work with my LTE exhaust. I found that lift on ebay for $152 which isn't bad. I just wonder if it will fit with me exhaust

I have this one



from Sand Spectrums http://goracertech.com/index.php?cPath=14

I liked the design of it and it did not appear to change the geometry of the suspension. The only downside to it was you have to drill holes through the frame on the rear and align those holes on both sides of the frame tube.

A lot of the kits changed to angle of the springs. This kit actually moves the shock mounting point and ties everything together.

yellowzx01 wrote:

I wonder if that roktek lift would work with my LTE exhaust. I found that lift on ebay for $152 which isn't bad. I just wonder if it will fit with me exhaust

I had to relocate one bolt on my Roktek to accommodate my SuperTrapp. No big deal. Good lift kit. Didn't need it after buying SuperATV springs.

Finzup wrote:

yellowzx01 wrote:

I wonder if that roktek lift would work with my LTE exhaust. I found that lift on ebay for $152 which isn't bad. I just wonder if it will fit with me exhaust

I had to relocate one bolt on my Roktek to accommodate my SuperTrapp. No big deal. Good lift kit. Didn't need it after buying SuperATV springs.

would you care to post a pic of yours from the rear so I can see it. I have the looney tuned duals and I think they may hit the mounts.

yellowzx01 wrote:

Finzup wrote:

yellowzx01 wrote:

I wonder if that roktek lift would work with my LTE exhaust. I found that lift on ebay for $152 which isn't bad. I just wonder if it will fit with me exhaust

I had to relocate one bolt on my Roktek to accommodate my SuperTrapp. No big deal. Good lift kit. Didn't need it after buying SuperATV springs.

would you care to post a pic of yours from the rear so I can see it. I have the looney tuned duals and I think they may hit the mounts.

Don't have it anymore or I'd be glad to.

RHarrah wrote:

I have this one



from Sand Spectrums http://goracertech.com/index.php?cPath=14

I liked the design of it and it did not appear to change the geometry of the suspension. The only downside to it was you have to drill holes through the frame on the rear and align those holes on both sides of the frame tube.

A lot of the kits changed to angle of the springs. This kit actually moves the shock mounting point and ties everything together.

I just bought 2 sets like this they are on sale till midnight tonight.