RZR roof mount speaker box

Ok James , can you build it ?
Here is the basic shape .......





In the RZR , picture taken pointed up from the seat area ....



Side view , The 2 way radio is pushing down in the center so it looks bowed



Side view , I just could not get far enough away to get it all in view .....



As it sits James it is 3" thick , but can go to a min of 2 1/2 " thick , depending on how your roof fits over the cross bar on the back of cage to the roof . I am making this off of the plastic Polaris roof ...... I am also looking for some good suggestion on how to get the speaker wires from the front speakers that I posted to this area , I have just not found a good route .

He can do it! He is like McGyver! He can make a gun out of strawberry douche

Looks real good Drew ... easy enough.

That would be a cool enclosure for sure!

When I built my overhead console I used air brake tubing to run my wires thru and than ran them up along the A post of the roll cage. Not the cleanest but I didnt want to drill a hole in the roll cage and snake them thru.

TBONE21 wrote:

He can do it! He is like McGyver! He can make a gun out of strawberry douche

depending on what size it could be a strwberry cannon

Firepup wrote:

When I built my overhead console I used air brake tubing to run my wires thru and than ran them up along the A post of the roll cage. Not the cleanest but I didnt want to drill a hole in the roll cage and snake them thru.

That's me , I do not want holes in the roll bars , I had several people tell me it ok as long as the hole is round or filled . I thought about between the dash and the floor plan and along the frame and back , or as you said just take it along the roll bar .

I'm Impressed....

NICE...

bubba53 wrote:

I'm Impressed....

Thanks Bubba , I'm Ready to watch the madd scientist( AKA James ) do his thing ........

Hey Drew, when I made my roof mounted system wiring was every where but you've seen the finished product if you want me to wire it up let me know I'll come over heat shrink, tie and loom it properly you know how anal and fixated I can be with a project.

Thanks Dave , I got a good temporary setup going so I will see as soon as I can get with James to do the top and Radio setup . I have a obligation this coming weekend , and possibly the next so sometime after that is when I hope to get up to James , he has some good ideas on how to make it .

punder wrote:

Thanks Dave , I got a good temporary setup going so I will see as soon as I can get with James to do the top and Radio setup . I have a obligation this coming weekend , and possibly the next so sometime after that is when I hope to get up to James , he has some good ideas on how to make it .

Whenever works for you Punder .... I'm ready

did y'all ever build this overhead radio enclosure??

not that i know of, or i'd most likely have one.

Hey Drew, Great minds think alike. I am going to do basically the same thing you are doing, in fact I was telling Darrel about it last night. I am going to build a form much like you have out of ridgid foam then carbon fiber it. .

The problem I ran into was the bow in the roll bar making a odd corner right were you get in , it being made of metal made me rethink it some . I still have the template if anyone would like to build it out of metal . Rick I had thoughts of making a paper mache ( like you used to make in school ) template so that I could make that corner better ( you will see what I am talking about when it comes to that odd corner . It is almost perfect from the rear cross bar to the center bar were the front and rear sections come together , its just the ourside bars that are odd . Good luck Rick and do post some pictures , I would like to see the process .

I go back to work for two weeks on Wednesday..when I get off I am going to try to come up with a better radio set up. Right now I have a marine box from cabalas mounted down understand the dash and two speakers up on the front ad back bars over head but I ain't real happy with it..it serves its purpose but you can tell it is pretty rigged...I would just lime to have a nicer set-up without spending a fortune on all these set ups you see at your local dealer and advertised online...surely someone on here has a simple effective home made setup(with pics hopefully)

Give me a couple weeks, I think I can come up with a good soulution. Kinda busy for the next week or so, then I will get to it.

Rhinorider wrote:

Give me a couple weeks, I think I can come up with a good soulution. Kinda busy for the next week or so, then I will get to it.

Sound good Rick , interested to see what you come up with .....

Thanks...I know I am def. Interested and that goofy ole cousin jet would Prolly be interested too

did this ever get built?? it should be a easy build.

one way is the old car stereo ideas. fiberglass resin and cloth.

This ever get attempted yet?

Let me know cuz with pics lol

What else he working on

a folding aluminium crate for rayray and i to get in and out of our RZR's.