Which sprague carrier do I get?

I'm putting a new drive shaft in my rzr and I might as well go ahead and replace the plastic sprague carrier with a better one. The question is I see hardened aluminum 6061 I think and billet aluminum 7075, what is the difference and also which one comes with new springs and new rollers? Anyone?

get a hold of WV Hot Rod Rhino....he can tell you....

I would say that billet would be the better of the two, but either one will do the job.

Super Dave wrote:

I'm putting a new drive shaft in my rzr and I might as well go ahead and replace the plastic sprague carrier with a better one. The question is I see hardened aluminum 6061 I think and billet aluminum 7075, what is the difference and also which one comes with new springs and new rollers? Anyone?

I got the 6061 from super atv. com .... I think you can get them with the springs and roller bearings now...

This one is a good one and come with installation tool to hold rollers in place when installing. However you can also cut the top and bottom off of a 20 oz. plastic soda bottle and have the same tool.

http://www.shopping.com/istlo?mn=Amazon%20Marketplace&votf=http://stat.dealtime.com/DealFrame/DealFrame.cmp?bm=536&BEFID=96477&aon=%5E&MerchantID=301531&crawler_id=1903311&dealId=LWz3IjHPDsGZo5xtVUJTBg%3D%3D&url=http%3A%2F%2Fwww.amazon.com%2Fdp%2FB004K0F434%2Fref%3Dasc_df_B004K0F4341625680%3Fsmid%3DA1AC2BK3ZLITYE%26tag%3Ddealtime-auto-mp01-20%26linkCode%3Dasn%26creative%3D395105%26creativeASIN%3DB004K0F434&linkin_id=3057561&Issdt=&searchID=BzNwgmb6aa&DealName=Holz+Racing+Polaris+RZR+Billet+Roller+Cage+Front+D&dlprc=319.0&crn=&istrsmrc=1&isathrsl=0&AR=3&NG=13&NDP=36&PN=1&ST=0&DB=sdcprod&MT=phx-pks5&FPT=DNSR&NDS=&NMS=&MRS=&PD=&brnId=3339&IsFtr=0&IsSmart=0&DMT=&op=&CM=&DlLng=1&RR=3&cid=&semid1=&semid2=&IsLps=0&CC=0&SL=0&FS=0&code=&acode=526&category=&HasLink=&frameId=&ND=&MN=&PT=&prjID=&GR=&lnkId=&VK=&IsGtb=0&SPT=CROSSGV&MNID=0&sig=5a9881511171a48a1a3b4d10405cddd290648109&CT=2

SuperATV

Just installed one a while back. Comes with the springs, should not need new rollers.

RZR_Joe wrote:

SuperATV

Just installed one a while back. Comes with the springs, should not need new rollers.

so that was what was wrong with yours....