| | The Green Machine |  |
|
+3Yotehunter66 My 800 WV Hot Rod Rhino 7 posters |
|
| Author | Message |
|---|
Guest
Guest
|  Subject: Re: The Green Machine  January 5th 2016, 11:20 am | |
| |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:26 am | |
| | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:28 am | |
| | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:30 am | |
| | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:43 am | |
| On to the air box....  And I did it without flex and the dip stick is still accessible!  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| |
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:45 am | |
| Done with the snorkels!! Waiting on a part from Nikki to button this up and start putting it back together. I'll extend all the little vent lines tomorrow
https://vimeo.com/143495621 | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:46 am | |
| New Extreme sheave, fixed, belt and purple spring. WOOO HOOO!!!!! Thank you James and thank you Nikki for making sure I had all my parts by Friday!  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:48 am | |
| | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:49 am | |
| So now I had the old 40" bar that I needed to do something with so this is what I did  The curve in the bar made for a perfect fit  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| |
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:53 am | |
| Got the radio in last night night from KYMedic, who by the way is awesome to deal with!!!   Installed an external waterproof speaker and a mic holder  I put the antenna back here  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| |
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:55 am | |
| | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:56 am | |
| Got my handheld radios today, thank you again KYMedic!!!  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:56 am | |
| freak...I'm ready to leave work now!!!  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:57 am | |
| Big difference! These are the fronts. Two lbs heavier than the fox  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:57 am | |
| Didn't get home until late but I managed to get the fronts done. With work and family activities, it's probably going to be this weekend before I get to the backs.  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:58 am | |
| Check this out, left tire is touching the concrete and right is 4" off the ground. But when I set it down, both sides were level. Axle still turned freely at full drop  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 11:59 am | |
| On to the rears! RadFlo mounts the rear resi's on the rear vertical frame where the arms connect. To me it just seemed to low and looked like a good place to get screwed up. So I cut some pieces of angle to weld in  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| |
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 12:00 pm | |
| And the finished product. Put the tires back on and adjusted the ride height. I set the bike up 1/2" lower in the rear as I read this helps it handle better  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| |
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 12:03 pm | |
| I'll figure out if I'm gonna put the sway bar back on later when it's not raining. Right now I'm gonna take 3" out of the B pillar The before:  ...and after the cut  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 12:03 pm | |
| Sleeved and drilled for plug welds  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 12:04 pm | |
| Just need to let it dry and I'll put it back together tomorrow  | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| |
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 12:05 pm | |
| | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 12:05 pm | |
| | |
|
| | |
robleticia
Number of posts : 226
Age : 54
Location : Angleton, TX
Registration date : 2015-08-24
| | Subject: Re: The Green Machine January 5th 2016, 12:06 pm | |
| Out with the old hood decal  Sorry signguygary, nothing against your nice stickers, I just had to represent!!!!  And that should bring The Green Machine thread back up to speed....for now! :) | |
|
| | |
Sponsored content
| | Subject: Re: The Green Machine | |
| |
|
| | |
| | The Green Machine | |
|
Calendar