Big Horn tire question

I am about to order the Big Horns and the only rears they make are 25x10x12 the factory tires on my Ranger 400 are 25x11x12. These will be a little more narrow. Not sure if it is going to be a huge issue.

Thoughts?

I was going to get GBC dirt tamers in 26" but really want the bighorns and since they run large I cam order 25's and still get a true 26" height.

the 25x10x12 should be fine.

less hp loss with the 10s

Good choice for mileage ~ You'll love them...

We've got three set's...

(2 sets) 25" (one set has over 7000 miles-just to the wear indicator "thingy")
(1 set) 26" on RZR

Good Luck Ride Baby Ride! Miles & Miles & Miles!

Ok I went with the Dirt Tamers. I decided so for a couple reason's price was not the big issue.

1. The width of my Ranger sometimes put me on the edge of ruts or trails. So the 4 extra inches of contact between both rear tires I feel will make the difference in those scenario.
2. Size. To get the Big Horns in a 12 width would require me to get the 26" (they measure a size big from what I gathered) Bighorns which would make the Ranger sit higher than I need and cause balance and clearance issues with obsticales.
3. Big Horns will last longer, but I plan on adding and RZR to the stable this fall/winter, so this will be the wifes ride and see much less use.

Thanks for all the input though!

you will love the dirt tamers. i still have a set of 27s in the barn that i had on my le rzr. i put 1400miles + on them and still have close to half tread.